Bike7 - Pro Seal 125ml

Pro Seal is a latex emulsion that quickly seals punctures in all tubeless tires, whether mountain bike or road tires. Pro Seal sealant is applied through the valve or poured directly into the partially disassembled tire, providing an effective immediate repair.

• Can be used in both "Tubeless" and "Tubeless ready" tires.
• Seals punctures up to 8mm.
• Compatible with CO2 cartridges.
• Contains natural Latex, is non-corrosive or toxic.
• Pressure resistant up to 7 bar / 100 PSI.

INSTRUCTIONS FOR USE:

Disassembled tire:

New tire: clean the inside with Bike7 Degrease and wipe dry. Mount one side of the tire, keeping the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, holding the bottle upright. Fully mount the tire.

Mounted tire, with the 125 ml bottle:

Remove the valve core and place the wheel, with the valve facing down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2 mm from the end and pour the required amount directly through the valve while holding the bottle upright. Reassemble the valve.

Inflating the tire:

Gently rotate the wheel a full revolution. Inflate the tire until it is properly seated. Rotate and wobble the wheel for ±1 minute to ensure good distribution of Bike7 Pro Seal. Inflate the tire to the desired pressure.

Road tire (23-30 mm): 60 ml / tire and MTB tire (29", 2.0-2.4): 100 ml / tire.

For larger tires, a larger quantity is recommended. For better protection, a larger quantity of product can be used.

Effective lifespan between 3 and 8 months, depending on conditions. Check the fluidity of the product monthly and refill if necessary. Item number: 977400924 EAN: 5414195014790 Brands: Bike7 Model: PRO SEAL Bicycle type Triathlon / TTTrekking bikeTouring bikeRecumbent bikeRoad bikeMountain bikeChildren's bikeHybrid bikeGravel bikeFolding bikeFixieCargo bikeElectric bikeCyclocross bikeCity bikeChopper bikeTransport bikeBMX

Content (ml): 125