Spray pump sprayer for Super Cleaner 1500ml

To be combined with our SUPER CLEANER
For all types of bikes
Optimizes detergent use
Allows product dilution
Generates an active foam

INSTRUCTIONS FOR USE
1. Fill the container with the liquid up to 0.5 L.
2. Screw the top firmly onto the container.
3. Pump until you hear air escaping from the valve, always do this before
spraying for maximum results. If the liquid reaches the
maximum level indicated, a greater number of strokes will be
needed.
4. Spray the foam from a distance of 50 / 70 cm from the area to be
treated. The foam nozzle does not require any adjustment.
5. Always ensure to release the pressure through the safety valve
before unscrewing the head.
• The user must always request the safety data sheet for the machine's
chemical composition from the dealer, also considering the regulations
regarding the disposal of any residual liquids.
• The use of substances not compliant with the regulations in
force is dangerous and puts the user at risk.
• The manufacturer is relieved of all liability in case of damage due to
improper use or interference with the product.
Maintenance advice
To obtain the best performance and lasting durability of the pump, follow
this advice:
1. After each use of the pump, depressurize, empty the tank, clean it thoroughly (with activated carbon, for
example) and rinse with clean water. Fill the container with clean water and operate the pump until the container and
circuit are empty. ADVICE: to always ensure the pump performs optimally, rinse with clean water and
do not leave the product in the circuit after use. This can clog the pores in the felt discs inside the lance.
2. Do not leave the pump pressurized for extended periods.
3. Lubricate the nozzle, gaskets, and O-rings at least once a year with petroleum jelly oil. Replace them if necessary.

Warnings
1. Our pressure pump with foam lance is designed to spray a soft foam from a water-diluted liquid; its use is recommended
in all terrains and/or cleaning situations where it is necessary to fix the cleaning liquid on the dirt for as long as possible.
1.1. The best performance is obtained if the liquid already contains foaming agents, allowing a firm fixation on the
area to be cleaned, achieving maximum cleaning action with a clear reduction in product consumption.
1.2. The pump has plastic parts and seals that may be damaged by the use of certain chemicals. The fan nozzle
in POM material can deteriorate if it comes into contact with acids, ammonium derivatives, and acid salts. You are therefore advised
to carry out compatibility tests to verify that the product(s) do not damage the materials of which
the pump is made.
2. Always release the pressure with the safety valve before unscrewing the top.
3. Never leave the pump unattended when the container is pressurized.
4. For safety reasons, never open the pump if it is still pressurized.
5. Keep out of reach of children.
6. Use of the pump implies liability.
7. Never expose the pump to sunlight and ensure it is stored in a frost-free environment. The pump can be used
at temperatures between +5 and +35°C.
8. Do not leave the pump near heat sources (e.g., a heater) because the material used to make the pump does not tolerate high temperatures.